PEG-7 Glyceryl Cocoate - A Comprehensive Guide for Cosmetic Formulators & Personal Care Manufacturers
PEG-7 Glyceryl Cocoate is a multifunctional, non-ionic surfactant widely used in the cosmetics and personal care industry. Known for its excellent emulsifying, solubilizing, and skin-conditioning properties, it is commonly applied in shampoos, body washes, facial cleansers, wet wipes, and skincare formulations.
As consumer demand for gentle, naturally derived, and high-performance ingredients continues to rise, PEG-7 Glyceryl Cocoate has become a preferred choice for formulators seeking mildness, enhanced sensory experience, and formulation versatility.
PEG-7 Glyceryl Cocoate is an ethoxylated monoester derived from coconut fatty acids and glycerin. It has a lightweight, oil-like texture and acts as a gentle, water-dispersible emollient.
PEG-7 Glyceryl Cocoate is known for its excellent skin tolerance, making it ideal for sensitive skin formulations. It provides gentle cleansing without stripping natural oils.
2) Superior Emollience
It imparts a silky, smooth, and moisturized feel to skin and hair, improving overall sensory performance.
3)Enhanced Solubilization
Effectively solubilizes fragrances, essential oils, and lipophilic actives in aqueous systems.
4)Foam Boosting
Improves foam density and stability in shampoos, body washes, and liquid soaps.
5)Wet-Wipe Compatible
Provides a non‑greasy moisturizing effect, widely used in baby wipes and facial wipes.
Its excellent stability under various conditions and cost-effectiveness make it a popular choice for manufacturers.
2) Biodegradable & Coconut-Derived
Although ethoxylated, its base raw material is naturally sourced from coconut oil, supporting clean-beauty branding.
3) High Formulation Flexibility
Compatible with anionic, non-ionic, and amphoteric surfactants.
4) Enhanced Sensory Experience
Improves spreadability, softness, and moisturization.
6. Recommended Dosage & Formulation Guidelines
Typical Usage Levels:
Cleansers: 1% – 10%
Shampoos: 1% – 5%
Lotions/creams: 0.5% – 3%
Wet wipes: 0.5% – 1.5%
Formulation Tips:
Add to the water phase or pre-mix with oils depending on system
Compatible with most surfactant systems
Stable across pH 4.0 – 9.0
Avoid high-temperature exposure for prolonged periods
PEG-7 Glyceryl Cocoate is a highly versatile, mild, and effective ingredient widely used in modern personal care and cosmetic formulations. Its ability to enhance sensory feel, solubilize oils, boost foam, and moisturize the skin makes it an essential raw material for premium formulations.
Whether you are a cosmetics manufacturer, formulator, or distributor, PEG-7 Glyceryl Cocoate offers excellent performance, stability, and value.
If you need product specifications, COA, MSDS, or sample support, feel free to contact us.
For business inquiries, bulk orders, or custom formulation support, please reach out to us anytime.
For technical documents, bulk pricing, or sample requests, please contact our sales team.
Yes. It is widely recognized as a mild and non-irritating ingredient, suitable for sensitive and baby-care formulations.
2. Is it derived from natural raw materials?
The base fatty acids are coconut-derived, although the ingredient undergoes ethoxylation.
3. Can it solubilize essential oils?
Yes. PEG-7 Glyceryl Cocoate is commonly used to solubilize fragrances and essential oils in water-based systems.
4. Does it leave a greasy residue?
No. It provides a light, silky, non-greasy after-feel.
5. Is it biodegradable?
Its coconut-derived portion is biodegradable, contributing to good environmental compatibility.
6. How will you deliver the goods?
We have strong cooperation with TNT,UPS,FEDEX,EMS,China Air Post. Forcontainer products,we can do sea shipping. You also can choose yourown sipping forwarder.
Don't miss out on this exciting new material from SOYOUNG.
You are welcome to send an inquiry by email to sale@auburnhillsmedical.com, and we will send it back within 24 hours.
PROWESS®LAMINOPLASTY SYSTEM
The PROWESS System provides a comprehensive solution for Laminoplasty procedures and consists of streamlined instrumentation and a variety of plate and spacer options for intraoperative adaptability. The instrumentation are intuitive and maintain secure connections to the implants. The implants are offered in a range of sizes and are color coded for easy visual identification.
Prowess Spacer Plates
4-12mm lengths (in 2mm increments) that work with various Spacers
8mm across neck, 5.7mm across center graft window
Color-coded plates allow for easy identification
Double-bend design, low-profile to allow further contouring
Anterior ridges resist slippage and increase torsional stability
Accepts Ø2.3 x 4mm Self-Tapping Bone Screw for assembly
Prowess Hook Plates
4-12mm lengths (in 2mm increments) that work with various Spacers
8mm across neck
Color-coded plates allow for easy identification
Double-bend design, low-profile to allow further contouring
Anterior ridges resist slippage and increase torsional stability
Prowess Hinge Plates
8mm across neck
Singe-bend design, low-profile to allow further contouring
Anterior ridges resist slippage and increase torsional stability
Prowess Spacers
Titanium or PEEK construction
6mm wide, and 4mm minimum height from posterior face to anterior curve
Implant Inserter grip features
Medial, lateral, and anterior anatomical curvatures
Graft cavities on all sizes
Accepts Ø2.3 x 4mm Self-Tapping Bone Screw for assembly
Titanium Spacers are color-coded for easy identification
Prowess Screws
Ø2.3 and Ø2.7 in 4-12mm lengths (in 2mm increments)
Self-Drilling and Self-Tapping
Color-coded screws allow for easy identification
Works with self-retaining Screw Driver
Same Ø2.3 x 4mm Self-Tapping bone screw assembles Spacer to Spacer Plate
CuriGraft Viable Allogenic Bone Matrix
CuriGraft® Viable Allogenic Bone Matrix is the next generation allograft containing the three key elements ideal for bone formation, offering a variety of clinical applications, including the spine, upper extremity, foot and ankle and orthopedic oncology.
Key Features
Osteoconductive three-dimensional scaffold with cortical and cancellous components
Demineralized cortical bone scaffold. Demineralized cortical bone has been identified to have osteoinductive potential1
Viable endogenous bone cells to support osteogenic healing processes
DMSO-FREE cryoprotectant, requiring no rinsing or decanting
Proprietary mixture of mineralized cancellous bone along with demineralized cortical fibers
Easy-to-use syringe, just thaw and use!
Four-hour working window for implantation post thaw
Storage: -65°C or colder
Size
Product Code
1.0cc
C034-0001-MCBMV
2.5cc
C034-0025- MCBMV
5.0cc
C034-0005- MCBMV
10.0cc
C034-0010- MCBMV
Reference: 1) Gruskin, E. et.al., Demineralized bone matrix in bone repair: history and use. Advanced Drug Delivery Reviews, 2012. 64:1063-1077 Biologics
CuriGraft® DBM Putty - Demineralized Bone Matrix Putty
CuriGraft® DBM Putty is a demineralized bone putty matrix indicated for use in the extremities, posterolateral spine, and pelvis as a bone void filler or for treatment of osseous defects.
Key Features
Product is provided in a ready-to-use syringe
Equivalent to iliac crest autograft proven in a preclinical spinal fusion model1
Assured osteoinductivity via validated processing
Cohesive handling that resists irrigation due to robust biocompatible carrier
Patient safety ensured through terminal sterilization and viral inactivation
Cortical demineralized bone and a carboxymethyl cellulose (CMC) carrier.
Size
Product Code
1.0cc
C024-0001-PTYV
2.5cc
C024-0025-PTYV
5.0cc
C024-0005-PTYV
10.0cc
C024-0010-PTYV
Reference: 1) Kiely, P.D. et al., (2014) Evaluation of a new formulation of demineralized bone matrix putty in a rabbit posterolateral spinal fusion model. The Spine Journal. September 14(9): 2155-2163.
SI-LUTION
The SI-LUTION® Sacroiliac Joint Fusion System is designed to offer immediate stability and long-term fixation across the sacroiliac (SI) joint. The implants are machined out of Titanium and incorporate the proprietary TRU-LOK® micro-textured surface technology. The cannulated system offers screws in multiple diameters and various lengths with optional static or kinetic stabilization caps to provide an ideal solution for every patient.
Key Features
Manufactured of Titanium with proprietary surface texturing
Large centralized helical fenestrations allow for direct allograft integration
Self-harvesting bone channels to harvest and distribute local bone during insertion
The Savant Anterior Lumbar (ALIF) Interbody Fusion System features three footprints in various heights and lordotic angles offering an ideal fit for every patient.
System Features
Manufactured of Titanium Featuring TRU-LOK®
Open Architecture
Micro-roughness surface texturing produces superior implant contact
Comprehensive discectomy instruments
Three Footprints (mm): 30W x 24D, 35W x 26D, 40W x 28D
8 – 20mm, offered in 2mm increments
Lordosis: 6° and 12°
Prodigy MIS
The Prodigy MIS Pedicle Screw System is designed to minimize the complexity of procedural steps while correcting and stabilizing the posterior thoracolumbar spine through a percutaneous approach. This system provides the same strength and rigidity as the Prodigy Polyaxial Screw System.
PEDICLE SCREW SYSTEM
Key Features
Minimized soft tissue disruption
Strong interface between rod and rod inserter
Undercut square thread designed to prevent cross-threading and tulip head splaying
Simple and efficient instruments provide advanced manipulation techniques
Available in 4.5, 5.5, 6.5 and 7.5 Diameter
Heights: 30-55mm in 5mm increments
MIS ROD
Key Features
Bulleted tip to facilitate placement
Robust instrument engagement feature
PRODIGY™
The Prodigy Polyaxial Pedicle Screw System is a posterior spinal fixation system designed to enhance the surgical experience by providing surgeons with its comprehensive implant offering and ergonomically designed instrumentation. The low-profile, friction fit design is offered in both standard and reduction geometries.
PRODIGY PEDICLE SCREW SYSTEM
Key Features
Self-tapping double lead bone screw threads
Continuous friction to maintain tulip position
Optimized instrument ports
Streamlined rod capture
Square thread designed to prevent cross-threading
Available in standard and dual-thread cortico-cancellous options
4.5 – 10.5mm diameter
Height: 25mm – 110mm lengths
5.5mm pre-bent or straight rod available
PRODIGY REDUCTION PEDICLE SCREWS
Key Features
Self-tapping double lead bone screw threads
Continuous friction to maintain tulip position
Optimized instrument ports
Streamlined rod capture
Square thread designed to prevent cross-threading
Extended tulip height of 23.5mm
26mm of threads
Reduction screws offered in 5.5 – 7.5mm in 25mm – 55mm lengths
5.5mm pre-bent or straight rod available
VARIABLE CROSSLINKS
Key Features
Versatile crosslink design with adjustable lengths and angle variability
Slim profile design
Center and lateral set screw features the same T20 hexalobe drive
64-85mm (Gold)
44-65mm (Light Blue)
34-45mm (Green)
OFFSET CONNECTORS
Key Features
20, 25 and 30 open and closed Offset Connectors
Connects to a Ø5.5mm rod
Accepts the same set screw as the pedicle screws
Flanged and smooth options
Savant TLIF
The Savant Transforaminal Lumbar (TLIF) Interbody Fusion System is offered in three different material types, multiple footprints, heights, and lordosis providing multiple options for the surgeon. The convex design offers a more accurate fit to the patient’s anatomy and offers oversized, central lateral graft windows for biologic seeding. The Savant Interbody Fusion System offers Comprehensive discectomy instruments and features instrumentation that allows for better control and more precise implant placement.
SAVANT PEEK TLIF
Key Features
Manufactured of biocompatible PEEK polymer
Strategically positioned tantalum radiopaque markers to optimize visibility and placement
Angled lateral windows on anterior side of implant to retain bone graft material
Large back surface area for increased instrument interface
Footprints (mm): 28L x 9W, 28L x 11W, 32L x 9W and 32L x 11W
Heights: 6 – 16mm, offered in 1mm increments
Lordosis: 0° or 8º
SAVANT TITANIUM TLIF
Key Features
Manufactured of Titanium Featuring TRU-LOK®
Open Architecture
Designed to offer immediate stability and long-term fixation
Micro-roughness surface texturing produces superior implant contact
Footprints (mm): 28L x 9W, 28L x 11W, 32L x 9W and 32L x 11W
Heights: 6 – 16mm, offered in 1mm increments
Lordosis: 0° or 8°
SAVANT TITANIUM PLASMA COATED TLIF
Key Features
Manufactured of PEEK with a titanium plasma spray coating
Footprints (mm): 28L x 9W, 28L x 11W, 32L x 9W and 32L x 11W
Heights: 6 – 16mm, offered in 1mm increments
Lordosis: 0° or 8º
Savant PLIF
The Savant Posterior Lumbar (PLIF) Interbody Fusion System self-distracting, bulleted tip is offered in three different material types, multiple footprints, heights, and lordosis providing multiple options for the surgeon. The Savant PLIF Interbody Fusion System features instruments that are simple and intuitive to use.
SAVANT PEEK PLIF
Key Features
Manufactured of biocompatible PEEK polymer
Strategically positioned tantalum radiopaque markers to optimize visibility and placement
Multi-directional teeth resist migration
Footprints (mm): 22L x 10W, 26L x 10W and 30L x 10W
Heights: 6 – 16mm, offered in 1mm increments
Lordosis: 0° and 8
SAVANT TITANIUM PLIF
Key Features
Manufactured of Titanium Featuring TRU-LOK®
Open Architecture
Micro-roughness surface texturing produces superior implant contact
Footprints (mm): 22L x 10W, 26L x 10W and 30L x 10W
Heights: 6 – 16mm, offered in 1mm increments
Lordosis: 0° or 8°
SAVANT TITANIUM PLASMA COATED PLIF
Key Features
Manufactured of PEEK with a titanium plasma spray coating
Optimal Radiolucency
Increased surface topography
Footprints (mm): 22L x 10W, 26L x 10W and 30L x 10W
Heights: 6 – 16mm, offered in 1mm increments
Lordosis: 0° and 8°
Aptitude
The Aptitude Cervical Plates feature a slim profile design allowing for a smooth anterior service. The simple and intuitive one-step locking mechanism facilitates complete control by the surgeon during the procedure. The Aptitude system offers streamlined instrumentation to accommodate the needs of the patients and surgeons.
ANTERIOR CERVICAL PLATES
Key Features
Low-profile Plate
Large Graft Window
Simple and effective, one-step locking mechanism
Pre-Lordosed to match patient anatomy
1-5 level plates
17mm plate width
2.2mm thick
ANTERIOR MIDLINE CERVICAL PLATES
Key Features
Small incision, minimizing lateral retraction
Narrow width optimizes post-operative visualization of the fusion site
Posterior cleats resist slippage and increase torsional stability
1-2 level plates
10.5mm plate width
2.2mm thick
APTITUDE SCREWS
Key Features
Ø4.0 and Ø4.5 in 12-18mm lengths (in 2mm increments)
Self-Drilling, Self-Tapping, Fixed and Variable Screws
Color-coded screws allow for easy identification
Same screws used for both Standard and Midline plates
Sage
The Sage Cervical Interbody Fusion System is designed to support cervical loads while maximizing surface between the implant and vertebral bodies. The Interbody is offered in four footprints to accommodate individual patient anatomy while the streamlined instrumentation is designed to aid in consistent and accurate implant placement.
SAGE PEEK CERVICAL
Key Features
Manufactured of biocompatible PEEK polymer
Tantalum radiopaque markers to optimize visibility and placement
Multi-directional aggressive teeth designed to prevent implant migration
Large, central graft cavity for packing bone graft
Color-coded instruments for easy identification
Footprints (mm): 12W x 11D, 14W x 12D, 16W x 13D, and 18W x 14D
Heights: 5-12mm, offered in 1mm increments
Lordosis: 7°
SAGE TITANIUM CERVICAL
Key Features
Manufactured of Titanium with surface texturing
Open Architecture
Micro-roughness surface texturing produces superior implant contact
Designed to ensure a high degree of compressive strength and dimensional stability
Footprints (mm): 12W x 11D, 14W x 12D, 16W x 13D, and 18W x 14D
Heights: 5-12mm, offered in 1mm increments
Lordosis: 7°
SAGE TITANIUM COATED CERVICAL
Key Features
Manufactured of PEEK with a titanium plasma spray coating
Surface topography produces superior implant contact and construct stability
Optimal Radiolucency
Self-distracting leading edge to facilitate implant insertion
Footprints (mm): 12W x 11D, 14W x 12D, 16W x 13D, and 18W x 14D
Heights: 5-12mm, offered in 1mm increments
Lordosis: 7°
Contact Curiteva
Contact us to learn more about Curiteva’s products and technology